Shotshell Reloading

Use this area to discuss topics relating to hand loading or reloading ammunition.

Re: Shotshell Reloading

Postby Carnea » Wed Jun 05, 2013 4:32 pm

:D
Last edited by Carnea on Thu Feb 06, 2014 1:30 pm, edited 1 time in total.
Carnea
 

Re: Shotshell Reloading

Postby jcat » Wed Jun 05, 2013 5:23 pm

Carnea wrote:Crimping definitely is easier when using a good quality hull. By looking at the crimp die, you should be able to count the 6 or 8 crimping surfaces (most hulls are 8). Using good quality hulls will make the entire process much easier, and will allow you more reloads. The cheap hulls will fail crimping more often, and will start to crack or break sooner than the well-made hulls.


I'd imagine the newer high strength AAs are pretty good then?
G19 Gen 4 // G34 MOS // Glock 21 Gen 4 // Browning BPS Trap // BCM/Black Rain RECCE clone
jcat
 
Posts: 1624
Joined: Mon Jul 30, 2012 3:04 am

Re: Shotshell Reloading

Postby Blast54 » Wed Jun 05, 2013 7:17 pm

The old hulls were the best. A MEC press will crimp any hull like factory if it is adjusted correctly and you are using the right wads.
Blast54
 
Posts: 621
Joined: Tue Sep 28, 2010 9:51 pm

Re: Shotshell Reloading

Postby Carnea » Thu Jun 06, 2013 4:31 pm

:D
Carnea
 

Previous

Return to Reloading

Who is online

Users browsing this forum: No registered users and 1 guest

cron